Installation housing ThermoX® LED
ThermoX® LED housing
- Article no: 9320-11
- EAN: 4013456545779
- for rigid and pivoting LED luminaires
- circumferential airtight sealing lip
- Swivel trough for alignment of the luminaire
Installation housing ThermoX® LED
ThermoX® LED installation housing for the airtight installation of rigid and pivoting LED built-in luminaires in different ceiling constructions. The housing protects the surrounding material (vapour barrier foil, insulation etc.) against the high operating temperatures and the LED luminairesthemselves from contamination, and creates an airtight separation. In combination with the thermal separation between luminaire and operating device, in this way a maximum operating lifetime is obtained.
- For installation in insulated hollow ceilings
- Retrofitting from underneath
- Toolless installation of the housing
- Guarantees airtight installation
- Rear surface structure ensures optimal heat management
- Permanent and secure retention of the luminaire in the housing
![](https://assets.attema.com/products/68/6860/44x44/luftdicht_en.png)
![](https://assets.attema.com/products/68/6858/44x44/halogenfrei_zeichen_en.png)
![fire-resistant up to 850°C in accordance with DIN EN 60670](https://assets.attema.com/products/10/1030/44x44/icon_unterkapitel_feuerbestaendig_850grad.png)
![LED luminaires](https://assets.attema.com/products/11/1129/44x44/led_pikto.png)
![](https://assets.attema.com/products/79/798/44x44/icon_video.png)
Examples of use
Temperature profiles ThermoX® LED (room temperature 25ºC)
Air-tight installation and fire-preventive protection
The ThermoX® LED housing protects the surrounding material against the extremely high temperatures that may occur during the operation of LED lamps. The housing must be installed without any surrounding insulating material coating. This protective measure can be taken both for new constructions and for retrofitting. The LED housing allows for air-tight installation because it does not destroy the vapour barrier foil that contributes to the air-tight building shell. Because of their air tightness, LED housings are also suitable for use in all suspended ceiling systems where uncontrolled air exchange is to be avoided (e.g. climate or cooling ceilings) and dustproof installation needs to be achieved (e.g. prevention of dust particles due to material removal).
Installation
Technical processing instructions/standards
- use only certified (EN 60598) luminaires which are suitable for direct installation on normally flammable materials
Processing instructions
Installation notes
Air-tightness certificate
Guaranteed airtight housing for the energy-efficient electrical installation of luminaires. The appropriate certificate can be obtained from us or downloaded from our website.