Results filtered according to:
No results were found for the filter!
UHW40 Hollow wall junction box Ø 19 mm
Flush-mounted boxes Hollow-wall
- With bottom outlet.
- 2 HWT pieces (for normal fastening) supplied per flush-mounting box (art.no. AT1051).
- Automatic pipe locking by means of pipe snapper.
- Equipped with hinged pipe inlet.
- Sideways fastening by means of HSB-support possible (art. no. AT1052).
- Distance to pipe inlet 16 mm: 18 mm.
- Distance to pipe inlet 19 mm: 16 mm
Amount Packaging: 10 x 10 st.
HWD50L-BW fire resistant Hollow wall junction box Ø 16/19 mm
Fire-resistant hollow wall boxes
- Maximum 90 minutes fire resistant in an insulated wall.
- Maximum 60 minutes fire resistant in a non-insulated wall.
- Tested in a non-load-bearing wall construction with 2 x 12,5 mm plasterboard panels on both sides.
- Halogen-free.
- Fitted with combination nozzles 16/19 mm.
- In combination with sealing cap HWD50L (art. no. AT1065) suitable for airtight applications.
- Standard suitable for sheet thickness 25 mm.
- With bottom outlet.
- Applicable for 'open' walls.
- Sideways fastening by means of HSB-support possible (art. no. AT1052).
Amount Packaging: 25 st.
HWD50L Hollow wall junction box Ø 16/19 mm
Flush-mounted boxes Hollow-wall
- Fitted with combination nozzles 16/19 mm.
- In combination with sealing cap HWD50L (art. no. AT1065) suitable for airtight applications.
- Standard suitable for sheet thickness 25 mm.
- In combination with spacer (art. no. AT1058) also suitable for sheet thicknesses 9.5 - 12.5 - 15 and 18 mm.
- With bottom outlet.
- Applicable for 'open' walls.
- Sideways fastening by means of HSB-support possible (art. no. AT1052).
Amount Packaging: 10 x 10 st.
HWD50L Hollow wall junction box halogen free
Flush-mounted boxes Hollow-wall
- Halogen-free.
- Fitted with combination nozzles 16/19 mm.
- In combination with sealing cap HWD50L (art. no. AT1065) suitable for airtight applications.
- Standard suitable for sheet thickness 25 mm.
- In combination with spacer (art. no. AT1058) also suitable for sheet thicknesses 9.5 - 12.5 - 15 and 18 mm.
- With bottom outlet.
- Applicable for 'open' walls.
- Sideways fastening by means of HSB-support possible (art. no. AT1052).
Amount Packaging: 10 x 10 st.
HWM600 Hollewand Montagestrip
Flush-mounted boxes Hollow-wall
- Metal mounting strip, applicable in the pre and pre-assembly of the cavity wall construction.
- A robust and stable fastener for the HWD50L.
- Applicable at 12.5 mm and 25 mm sheet thickness.
- When using the HWM600 and a HWD50L at 12.5 mm sheet thickness, the spacer (art. no. AT1058) provides additional stability in the installation construction.
- Possibility of 5 coupled hollow wall boxes at various positions in the hollow wall that can be installed simultaneously.
- To be placed from the front of the metallic uprights. This is independent of the total wall thickness.
- No impact noise when installing the installations in the hollow wall.
- Fixing width: 600 mm
- Hole diameter: 20 mm
Amount Packaging: 20 st.
Standoff HWD50L
Flush-mounted boxes Hollow-wall
- Applicable on HWD50L.
- Suitable for sheet thicknesses: 9.5 mm 12.5 mm 15 mm and 18 mm.
- Fastening by means of chipboard screws Ø 4.0 mm (not supplied).
Amount Packaging: 5 x 20 st.
Closure plug HWD50L
Flush-mounted boxes Hollow-wall
- For airtight sealing of pipe inlet(s) HWD50L.
Amount Packaging: 4 x 25 st.
HWD50 Hollow wall junction box Ø 16 mm
Flush-mounted boxes Hollow-wall
- Without bottom outlet.
- 2 HWT pieces (for normal fastening) included per flush-mounting box (art. no. AT1051).
- Automatic pipe locking by means of pipe snapper.
- Applicable for 'open' walls.
- Distance to pipe inlet 16 mm: 32 mm
- Distance to pipe inlet 19 mm: 30 mm
Amount Packaging: 10 x 10 st.
HWD50 Hollow wall junction box Ø 19 mm
Flush-mounted boxes Hollow-wall
- Without bottom outlet.
- 2 HWT pieces (for normal fastening) included per flush-mounting box (art. no. AT1051).
- Automatic pipe locking by means of pipe snapper.
- Applicable for 'open' walls.
- Distance to pipe inlet 16 mm: 32 mm
- Distance to pipe inlet 19 mm: 30 mm
Amount Packaging: 10 x 10 st.
HWD50S Hollow wall junction box Ø 16 mm
Flush-mounted boxes Hollow-wall
- With bottom outlet.
- 2 HWT pieces (for normal fastening) included per flush-mounting box (art. no. AT1051).
- Automatic pipe locking by means of pipe snapper.
- Applicable for 'open' walls.
- Sideways fastening by means of HSB-support possible (art. no. AT1052).
- Distance to pipe inlet 16 mm: 32 mm
- Distance to pipe inlet 19 mm: 30 mm
Amount Packaging: 10 x 10 st.
HWD50S Hollow wall junction box Ø 19 mm
Flush-mounted boxes Hollow-wall
- With bottom outlet.
- 2 HWT pieces (for normal fastening) included per flush-mounting box (art. no. AT1051).
- Automatic pipe locking by means of pipe snapper.
- Applicable for 'open' walls.
- Sideways fastening by means of HSB-support possible (art. no. AT1052).
- Distance to pipe inlet 16 mm: 32 mm
- Distance to pipe inlet 19 mm: 30 mm
Amount Packaging: 10 x 10 st.
HWT tabs
Flush-mounted boxes Hollow-wall
- For normal fixing via slotted holes in the wall of UHW40, HWD50 and HWD50S.
Amount Packaging: 5 x 20 st.