Results filtered according to:
No results were found for the filter!
T40 Tee/branch connector white (RAL 9010)
K40 Plinth System
- Consists of basic plate, mounting plate, cap and branch cap with insert.
- For vertical branching with K40 skirting duct, raceway P25, K25, Z25 or KK 25x22 in which the correct separation of both compartments is continued.
- Entry from the wall is possible via round break-outs in the base plate.
- Sufficient splice area under the cap.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: White (RAL 9010)
Amount Packaging: 10 st.
T40 Tee/branch connector cream (RAL 1013)
K40 Plinth System
- Consists of basic plate, mounting plate, cap and branch cap with insert.
- For vertical branching with K40 skirting duct, raceway P25, K25, Z25 or KK 25x22 in which the correct separation of both compartments is continued.
- Entry from the wall is possible via round break-outs in the base plate.
- Sufficient splice area under the cap.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: Cream (RAL 1013)
Amount Packaging: 10 st.
ZC40 duplex outlet white (RAL 9010)
K40 Plinth System
- Duplex with earth connection and child protection.
- 16A / 250V with plug-in contacts for solid conductors.
- Consists of mounting plate with pre-mounted and pre-wired elements, cap and attachment hardware.
- Can be used horizontally or vertically.
- Rotated receptacles so right-angled mains plugs run nicely along the skirting board.
- If necessary, the receptacles can be wired separately.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: White (RAL 9010)
Amount Packaging: 20 st.
ZC40 duplex outlet cream (RAL 1013)
K40 Plinth System
- Duplex with earth connection and child protection.
- 16A / 250V with plug-in contacts for solid conductors.
- Consists of mounting plate with pre-mounted and pre-wired elements, cap and attachment hardware.
- Can be used horizontally or vertically.
- Rotated receptacles so right-angled mains plugs run nicely along the skirting board.
- If necessary, the receptacles can be wired separately.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: Cream (RAL 1013)
Amount Packaging: 20 st.
EW40 Two-way switch white (RAL 9010)
K40 Plinth System
- 10A / 250V with plug-in contacts for solid conductors.
- Consists of mounting plate with pre-mounted element, cap, rocker control and attachment hardware.
- Can be used horizontally or vertically.
- Element and rocker control can be rotated for vertical application.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: White (RAL 9010)
Amount Packaging: 10 st.
EW40 Two-way switch cream (RAL 1013)
K40 Plinth System
- 10A / 250V with plug-in contacts for solid conductors.
- Consists of mounting plate with pre-mounted element, cap, rocker control and attachment hardware.
- Can be used horizontally or vertically.
- Element and rocker control can be rotated for vertical application.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: Cream (RAL 1013)
Amount Packaging: 10 st.
EA40 RTV antenna connecting point white (RAL 9010)
K40 Plinth System
- Can only be used as terminating box.
- Consists of mounting plate with pre-mounted antenna junction box, cap, cover plate and attachment hardware.
- Frequency range 5-862 MHz.
- Suitable for broadband Internet return signals on the male connector (TV).
- Tap loss 5 dB.
- Cover plate with click attachment.
- Can be used horizontally or vertically.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: White (RAL 9010)
Amount Packaging: 10 st.
EA40 RTV antenna connecting point cream (RAL 1013)
K40 Plinth System
- Can only be used as terminating box.
- Consists of mounting plate with pre-mounted antenna junction box, cap, cover plate and attachment hardware.
- Frequency range 5-862 MHz.
- Suitable for broadband Internet return signals on the male connector (TV).
- Tap loss 5 dB.
- Cover plate with click attachment.
- Can be used horizontally or vertically.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: Cream (RAL 1013)
Amount Packaging: 10 st.
ED40 duplex Cat.5e data connecting point white (RAL 9010)
K40 Plinth System
- Consists of mounting plate, circuit board, cap, cover plate with dust caps and attachment hardware.
- Circuit board with 2x RJ45 jacks and tool-free pivoting terminal contacts.
- Cover plate with click attachment.
- Can be used horizontally or vertically.
- Circuit board and cover plate can be rotated for vertical application.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: White (RAL 9010)
Amount Packaging: 10 st.
ED40 duplex Cat.5e data connecting point cream (RAL 1013)
K40 Plinth System
- Consists of mounting plate, circuit board, cap, cover plate with dust caps and attachment hardware.
- Circuit board with 2x RJ45 jacks and tool-free pivoting terminal contacts.
- Cover plate with click attachment.
- Can be used horizontally or vertically.
- Circuit board and cover plate can be rotated for vertical application.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: Cream (RAL 1013)
Amount Packaging: 10 st.
ET40 simplex telephone connecting point white (RAL 9010)
K40 Plinth System
- Consists of mounting plate with pre-mounted circuit board, cap, cover plate with dust cap and attachment hardware.
- Is suitable for analogue telephone connection via RJ11 plug or ISDN connection via RJ45 4-pin plug.
- Wiring is connected via screw terminal block with conductor protection.
- Can be used horizontally or vertically.
- Circuit board and cover plate can be rotated for vertical application.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: White (RAL 9010)
Amount Packaging: 10 st.
ET40 simplex telephone connecting point cream (RAL 1013)
K40 Plinth System
- Consists of mounting plate with pre-mounted circuit board, cap, cover plate with dust cap and attachment hardware.
- Is suitable for analogue telephone connection via RJ11 plug or ISDN connection via RJ45 4-pin plug.
- Wiring is connected via screw terminal block with conductor protection.
- Can be used horizontally or vertically.
- Circuit board and cover plate can be rotated for vertical application.
- Overlap with skirting duct is 5 mm. It is unnecessary to cut the skirting duct cover perfectly square at exactly the right length.
Colour: Cream (RAL 1013)
Amount Packaging: 10 st.