- Quick assembly thanks to plug-in contacts with spring clamp.
- The plug-in clamp is provided with a protective cover.
- Flat design, so that the welding space in the central box is used optimally.
- Suspension hook and 2 screws M4x14 fixed in the lid.
- M4 bolts fitted with a combi head; suitable for automatic screwdriver.
- Universally applicable to any square central box.
- Easy to cut per 5 mm.
- Height correction possible from 5 to 30 mm.
- Flat design, so that the welding space in the central box is used optimally.
- Suspension hook and 2 bolts M4x14 fixed in the lid.
- M4 bolts with combi head; suitable for automatic screwdriver.
- Universally applicable on any round central box.
- Flat design, so that the welding space in the central box is used optimally.
- Suspension hook and 2 bolts M4x14 fixed in the lid.
- M4 bolts with combi head; suitable for automatic screwdriver.
- Universally applicable on any round central box.
- Equipped with 9 combi-heads 16/19 mm.
- Applicable in solid floors and hollow core slab floors.
- Clip-resistant in borehole ø 80 mm.
- Matching covers: (art. no. AT5010 and art. no. AT5011).
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- Can be used in wide boarded floors.
- Distance from the underside of the conduit entries to the open side of the box: 60 mm.
- Plastic bag against ingress of concrete water.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- Can be used in wide boarded floors.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- The penetration of concrete water into conduit entries is prevented by adhesive tape.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- Can be used in wide boarded floors.
- Distance from the bottom of the conduit entry to the open side of the box: 80 mm.
- Plastic bag against ingress of concrete water.
- Protective cover (Art. No. AT4818) and adhesive protective cover (Art. No. AT4850) available separately.
- Suitable covers for mounting: Art. no. AT5010 and AT5011.
- Easy to cut per 5 mm.
- Height correction possible from 5 to 30 mm.
- Fitted with inserts and pre-assembled M4 screws.
- Stackable underneath.
- Universally applicable on any round central box.
- Flat lid, for a good adhesion to the formwork.